MTA Machine Tool Accessories & MFG. Co. 1915 W Fullerton Ave. Chicago, IL 60614 Phone (773) 489-0903 Fax (773) 489-4466
Home Boring Bar Sleeves Boring Bar Bushings VDI Tool Holders Oil Skimmer Contact

VDI TOOL HOLDERS per DIN 69880 - Turret Face Mounting

VDI Radial Turning Tool Holder   VDI Radial Turning Tool Holder

VDI Radial Turning Tool Holder

Short B1 (pictured)

 

VDI Radial Turning Tool Holder

Long B5 (pictured)

  VDI Boring Bar & Drill Holders CDI Boring Bar & Drill Holders VDI Morse Taper Holders VDI ER Type Collet Holders  
  VDI Boring Bar & Drill Holders VDI Boring Bar & Drill Holders VDI Morse Taper Holders VDI ER Type Collet Holders  

VDI TOOL HOLDERS are available with 20MM, 25MM, 30MM, 40MM, 50MM, and 60MM shank sizes. All shanks are precision ground square to the adjacent shoulders.

All TOOL HOLDERS were designed and manufactured in MTA’s plant in Chicago.

All VDI Turning Tool Holders are available in various configurations depending on spindle rotation and whether rear or front turret mounted. Long Turning Tool Holders are generally used on shaft turning lathes.

All VDI Boring Bar / Drill Holders can be converted from external to internal (thru-the-tool) coolant delivery.

All VDI Morse Taper Holders can be converted from external to internal (thru-the-tool) coolant delivery. Morse Taper Holders have full length tapers.

All VDI Collet Holders can be converted from external to internal (thru-the-tool) coolant delivery. For thru-the-tool applications, sealed collets should be used. Collet Holders include an adjustable stop inside the shank and a standard Collet Nut.

VDI TOOL HOLDERS per DIN 69880 - Turret Edge (Periphery) Mounting

VDI Turning Tool Holders - Axial: Single and Double Configurations.

  C1 C3 C2 C4  
  C1 C3 C2 C4  
  C1-4 C2-3 C1-2 C3-4  
  C1-4 C2-3 C1-2 C3-4  
 

VDI D Style

D Style

These VDI Tool Holders are available with inch or millimeter tool capacity. On the Double Tool Holders the coolant can be directed to either tool or both. These VDI Tool Holders can also be Turret Face mounted to extend a machine’s turning and facing capacity.

On the VDI Turret Edge Mounted Boring Bar & Drill Holders the tool can extend to the front or rear and the coolant can be directed either to the front or rear or both, as well as thru the tool.

 

VDI Boring Bar and Drill Holders for Turret Edge (Periphery) Mounting.

VDI Boring Bar and Drill Holders for Turret Edge (Periphery) Mounting

VDI Boring Bar and Drill Holders for Turret Edge (Periphery) Mounting

Home - Boring Bar Sleeves - Boring Bar Bushings - VDI Tool Holders - Oil Skimmer - Links - Contact

Copyright © 2016 Machine Tool Accessories & MFG. Co. All rights reserved.

MC Logo Ecommerce Website Designer